Woodpeckers Clampzilla 38" 4 Way Panel Clamp Set of 4

CLAMPZILLA - 2022 - 38" Capacity - 4 Pack

Woodpeckers ClampZILLA 4-Way Panel Clamp places bars on both
sides of your stock, joined together by a self-centering scissors
joint on both ends. ClampZILLA focuses the lateral pressure on the
exact center of your panel (which avoids bowing), while applying
vertical pressure to keep the faces correctly aligned.

In addition to keeping your panels flatter, ClampZILLA saves
you both time and money. You would need 2 regular bar clamps
plus 2 “F” clamps and a set of clamping cauls to replace one
ClampZILLA 4-Way Panel Clamp. That’s four screws that you
have to adjust, while ClampZILLA applies vertical and horizontal
pressure simultaneously by simply turning one screw.

ClampZILLA’s design works with stock from 5/8" to 4". For jobs
thinner than 5/8", you can add a piece of 3/4" material above and
below your stock and get centered lateral pressure and simultaneous
vertical pressure on stock down to 1/4", or even less.

We designed ClampZILLA for the long haul. The steel bars and
clamping pads are powder-coated for a tough, long-lasting finish...
dried glue usually just pops right off. All the clamping mechanism
components are machined from stainless steel, except the clamp
screw pivot, which is machined from brass.