All Drum Sanders /  All Shop Fox / 

Shop Fox Drum Sanders

W1678 5 HP 26″ Drum Sander

Whether quickly sanding large quantities of panel assemblies or achieving “tear-out” free finishes on figured wood, the Model W1678 performs like a champ in even the most demanding shops. At a full 26″ wide, this Dual Drum Sander can be fitted with two different grits, allowing both rough and finish sanding in one pass.

  • Sanding motor: 5 HP, 220V, single-phase, 3450 RPM, 25A
  • Conveyor motor: 1/3 HP, 60V DC, 2A
  • Drum surface speed: 2300 FPM
  • Max. stock dimensions: 26″W x 4-1/4″H
  • Feed rates: variable (0–20 FPM)

W1772 10 HP 37″ Drum Sander

Designed for production shops, this 37″ sander has what it takes to get those big jobs done—fast. Sand boards and panels up to 4″ thick and 36-1/2″ wide, using two different abrasive grits in the same pass with the dual 6″ sanding drums. Feed speed is adjustable from 6 to 18 FPM. The variable-speed knob conveyor adjustment and amp meter make it easy to monitor the sanding load to ensure maximum efficiency. Other great features include a hinged hood, emergency stop bar, pedestal-mounted controls, four 4″ dust ports, and a 10 HP, 240V, single-phase motor. 

  • Sanding drum motor: 10 HP, 240V, single-phase, TEFC, 1725 RPM
  • Conveyor motor: 1/3 HP
  • Drum surface speed: 2800 FPM
  • Max. board width: 36-1/2″
  • Max. board thickness: 4″
  • Min. board length: 9″
  • Min. board thickness: 1/16″

W1854 18″ 1.5 HP Open-End Drum Sander w/Variable-Speed Feed

Our 18″ Open-End Drum Sander offers a lot of sanding capacity in a small amount of floor space. Sand stock up to 36″ wide and 4-1/2″ thick! Unlike other open-end drum sanders, the table moves up and down instead of the head. This means drum support is much more rigid during sanding operations, giving you more consistent results. Check out the rest of the features below and you’ll agree that this feature-packed sander is an incredible value!

  • Sanding motor: 1-1/2 HP, 120V, single-phase, 13 Amps
  • Sandpaper speed: 2600, 3400 FPM
  • Conveyor feed rate: 0-12 FPM
  • Maximum stock dimensions: 36″ wide x 4-1/2″ thick
  • Minimum board length: 6″
  • Minimum board thickness: 1/8″
  • Sanding drum size: 4″
  • Dust collection port: 4″
  • V-belt drive
  • Steel construction
  • 18″ x 44-1/2″ abrasive conveyor belt