Jessem 02310 Rout-R-Lift™ II

The Rout-R-Lift II has all the same great features as our Mast-R-Lift II but at a price we know you will appreciate. This lift is made out of aluminum with a phenolic top plate. The Rout-R-Lift II comes in 5 different styles depending on the router and router diameter you plan to use. Please verify which router you plan to use before purchasing one of these lifts.

DOUBLE SEALED BALL BEARING CONSTRUCTION

We wanted our Rout-R-Lift II to be as smooth as our new Mast-R-Lift II while raising and lowering your lift. To achieve this, we decided to add a double sealed bearing to the spindle. This provides a lifetime of use and a Lift so smooth you can raise and lower your motor with one finger.

BEARING THE TENSION OF THE LIFT

The shafts on the Rout-R-Lift II, like all our Router Lifts, are pressed into a shaft mount with hydraulic pressure. We do not just thread our shafts to the top plate. The owner of JessEm spent many years as a Tool and Die maker before founding our company, and cutting corners was not an option. By pressing the shafts into a larger diameter mount we are able to attach the shafts to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.

NO BENT WRENCHES

Like our current Mast-R-Lift II, bit changes above the table was a must for all routers that work with this lift without the need for bent wrenches.

CNC MACHINED

All the machined components on the Rout-R-Lift II are machined on one of our CNC mills here in our Oro-Medonte, Ontario, Canada location.