All Jointers /  All Powermatic / 

Powermatic Jointers

1610079 PJ882 Jointer, 2HP 1PH 230V

The 8″ Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82″ bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8″ depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP motor is totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs.

  • High-mount switch for operator convenience
  • Large 8″ x 82″ precision ground cast iron table surface for heavy-duty work
  • Parallelogram design allows for easy and accurate adjustment of tables
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Patented handwheel with worm gear system for precise fence tilting
  • Straight knife cutterhead with 3 high speed steel knives create a clean cut

1610082 PJ-882HH Jointer, 2HP 1PH 230V

The 8″ Parallelogram Jointer offers performance and value in a machine loaded with features. The cutterhead is a helical design with 54 four sided knife inserts – these produce a superior finish and much quieter operation than conventional cutterheads, and the inserts do not require adjustment once installed. The Jointer has an extra long 82” bed for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of heavy use. The 2HP motor is totally enclosed in a heavy steel stand, providing plenty of power and stability for the most demanding jobs.

  • High-mount switch for operator convenience
  • Large 8″ x 82″ precision ground cast iron table surface for heavy-duty work
  • Parallelogram design allows for easy and accurate adjustment of tables
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Patented handwheel with worm gear system for precise fence tilting

8″ Jointer, 2HP 1PH 230V

This 8″ Jointer meets the demand for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73” long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The jointer is available with a three high speed steel knife cutterhead, or a helical cutterhead with 54 four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base – store them on any metallic surface for instant access.

  • Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
  • Extra long tables are mounted on dovetailed ways for extended workpiece support
  • Handwheel operated worm gear system for smooth fence tilting
  • High mount switch for operator convenience
  • Magnetic push blocks can be stored on the machine within constant reach
  • Non-mar fence insert protects table surface
SKUDescription
1610084KThree straight high-speed steel knives give a clean cut
1610086KThe helical cutterhead with 54 four sided carbide inserts provides smoother, quieter cutting and a superior finish

1791279DXK 54A Jointer, 1HP 1PH 115/230V

The 6″ Jointer features three auto-set knives that align themselves in the cutterhead for rapid knife changes. Oversized infeed/outfeed tables are mounted on dovetailed ways and have a built-in rabbeting ledge. The fence is 38″ in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a powerful motor with a non-slip v-belt drive for maximum performance. The 4″ dust port offers easy connection to any dust collection system.

  • 66″ long adjustable infeed and outfeed tables provide more working surface
  • Built-in ledge for 1/2″ rabbeting capacity
  • Enlarged sheet metal stand provides a sturdy base
  • Extra-long 38″ two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts
  • Fence controls are center mounted for convenience
  • Fine/quick adjustment lever on infeed table for precision cuts
  • Push button switch is lockable to prevent accidental starting
  • Cutterhead features three high speed steel auto-set knives that automatically align themselves in the cutterhead

1791317K 54HH Jointer, 1HP 1PH 115/230V

This 6″ Jointer features a helical cutterhead with 40 four-sided indexable carbide knife inserts – this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways. The fence is 38″ in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4″ dust port offers easy connection to any dust collection system.

  • 66″ long adjustable infeed and outfeed tables provide more working surface
  • Enlarged sheet metal stand provides a sturdy base
  • Extra-long 38″ two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts
  • Fence controls are center mounted for convenience
  • Fine/quick adjustment lever on infeed table for precision cuts
  • Helical cutterhead with 40 four sided carbide inserts provides smoother, quieter cutting and finer finish than conventional systems
  • Push button switch is lockable to prevent accidental starting