All Festool /  All Routers & Motors / 

Festool Routers & Motors

574368 Router MFK 700EQ Set

With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps. Trim laminate and edge band or rout grooves for inlays easily with the light weight and maneuverable MFK 700. Packed with features, this trim router saves you money by allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1/256″ (1/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal router for all of your light routing tasks.

  • Powerful 720 watt (6.0 amp) motor can easily tackle most trimming, profiling and routing applications with variable speed and detachable cord.
  • Vertical and horizontal extra-wide bases provides ample support area for maximum control especially near edges or on narrow stock.
  • Micro-adjustable depth control to 1/256 inch (1/10 mm) with dual locking columns for precise routing control.
  • Threaded insert to accept template guides and phenolic resin baseplate to easily glide on a surface without marring the material to be routed.

574456 MFK 700 EQ Edge Banding Router for Conturo

The perfect edge demands the perfect finishing touch and the MFK 700 helps deliver those results through precision depth control and smooth running operation. Form edges on nearly any type of material thanks to the variable speed control which helps to prevent melting and burning of sensitive materials like PVC and exotic woods.

  • Edge router specially designed for flush trimming and rounding protruding edges
  • Helps to prolong cutter life while helping to prevent debris accumulating on the workpiece or the shop
  • Possible to flush trim 0 to 45 degree inclined edges

OF 1010 EQ-F-Plus Router

The ergonomics and precision features of the OF 1010 EQ deliver a host of benefits which add up to an unbeatable tool. One-handed operation allows you to switch it on and off, plunge, cut and release with ease. The compact design and the efficient center of gravity make this tool extremely maneuverable. Its micro-adjustable depth control is accurate to 1/256″ (1/10 mm). The OF 1010 EQ is also the lightest router of its kind—a real plus on extended projects. This, on top of enough power for all 1/4″ and 8mm bits.

  • Ergonomic handle with full-grip is designed for increased control and reduced fatigue with power switch and speed control at the fingertips.
  • The OF 1010 EQ Router provides a smooth 2-1/8″ plunge action which enables you to maintain complete control with a quick and secure plunge lock.
  • MMC electronic controls provide constant speed under load for improved cut quality, step-less variable speed, and overload and thermal protection.
  • Micro-adjustable depth control to 1/256″ (1/10 mm) which allows you to dial in your routing with tremendous precision.
SKUDescription
576204Chip catcher
Dia. 1/4″ clamping collet (6.35 mm)
Dia. 5/16″ clamping collet (8 mm)
Collet wrench, WAF 19
Systainer SYS3 M 237
576204CS Chip catcher
Dia. 1/4″ clamping collet (6.35 mm)
Dia. 5/16″ clamping collet (8 mm)
Collet wrench, WAF 19
Systainer SYS3 M 237
489427 Edge Guide
576835 Systainer³ SYS3-OF D8/D12 for Router Bits

OF 1400 EQ Router

The OF 1400 Router provides 1400 watts of power in a machine that weighs less than 10 lbs. It accepts 1/2″, 1/4″ or 8 mm bits. With enough power to handle most routing tasks and small enough to be extremely maneuverable, the OF 1400 is the one router every tradesperson should own. With a category-leading 2 3/4″ plunge depth, precise to 1/256″ (1/10 mm), this router gives you the power, precision, depth of cut, and dust extraction capabilities that will simplify your routing tasks.

  • Ergonomic handle with full-grip is designed for increased control and reduced fatigue with power switch and speed control at the fingertips.
  • The OF 1400 EQ Router provides a smooth 2-3/4″ plunge action on precision ground rods and a double column clamp with a quick and secure plunge lock.
  • Micro-adjustable depth control to 1/256″ (1/10 mm) with ball detents which allows you to dial in your routing with tremendous precision.
  • MMC electronic controls provide constant speed under load for improved cut quality, step-less variable speed, and overload and thermal protection.
SKUDescription
574692Chip catcher
Dia. 1/4″ clamping collet (6.35 mm)
Dia. 5/16″ clamping collet (8 mm)
Dia. 1/2″ clamping collet (12.7 mm)
Open ended spanner, WAF 24
574692CSChip catcher
Dia. 1/4″ clamping collet (6.35 mm)
Dia. 5/16″ clamping collet (8 mm)
Dia. 1/2″ clamping collet (12.7 mm)
Open ended spanner, WAF 24
492601 Guide Stop
492636 Edge Guide
576835 Systainer³ SYS3-OF D8/D12 for Router Bits

OF 2200 EB Router

The OF 2200 is our most powerful router. It can easily plunge into 8/4 hard maple and make a 1/2″ groove in a single pass. With 2200 watts of power, you might think you are working with a portable shaper. Designed for exceptional maneuverability, the OF 2200 incorporates many new ergonomic design features, making it easy to control, and a pleasure to use on the jobsite or in the shop.

SKUDescription
574689Open ended spanner, WAF 24
574689CSOpen ended spanner, WAF 24
497656 Accessory Kit ZS-OF 2200 Zoll
576835 Systainer³ SYS3-OF D8/D12 for Router Bits