All Festool /  All Mobility / 

Festool Mobility

204869 Sys-Cart Rolling Systainer Cart

The cart with intelligent added extras: All four large wheels can be rotated by 360°. This makes the cart an agile set of wheels – ideal for construction sites and workshops. Two of the four wheels are fitted with locking brakes. Thanks to the coupling, the Systainer³ and Systainer T-LOC units can be secured in place with the central control element. Other objects and materials can also be easily transported on the flat surface and secured using the strap feedthroughs. The four robust handles make it easier to maneuver and position the cart.

  • For easy transportation of Systainer³ and T-LOC
  • 4 robust handles
  • 4 steering rollers, (2 of which can be locked)
  • Feedthroughs for straps

498660 Sys-Roll Systainer Cart

Weighing in at a mere 14.3 lbs and with a capacity of 220 lbs, the SYS-Roll provides a simple, convenient means to get your Festool Systainers to and from the worksite, no matter the terrain. Integrated storage secures small parts essential to the task at hand, reinforced risers tackle stairs with ease, and large, locking casters make sure your stack stays put.

Please note that that the Sys-Roll is not compatible with SYS-MINI, SYS-MIDI, and SYS-MAXI SYSTAINERS.

  • With large 7-7/8” casters and integrated stair climbing strips, the SYS-Roll is ready to go where your work takes you.
  • Boasting an 11 lb capacity, its drawer is just the place you’ve been looking to put small parts you need on the job.
  • Capable of carrying up to 220 lbs. of tools and accessories stored in your SystainerS and SORTAINERS.
  • Large, non-marring wheels and casters get you were you need to go without scuffing floors.
  • Adjustable strap keeps your stack in place even on rough terrain.
  • for transporting Systainer³, T-LOC and Classic
  • Extra large wheels (D 200 mm) for easy transportation up and down steps
  • Rotating lockable front rollers – manoeuvre in all directions
  • Incl. safety belt

204310 CT Dust Extractor Handle for MINI/MIDI-2/CT15

CT Dust Extractor Handle improves mobility for the Festool CT 22 and CT 33 Dust Extractors, helping you easily transport your CT to and from the jobsite, or from one shop station to another. Constructed from durable steel tubing with high impact plastic mounting brackets for a long life. Mounts to the rear of the dust extractor.

  • Improves mobility for the Festool CT 22 and CT 33 Dust Extractors
  • Constructed from durable steel tubing with high impact plastic mounting brackets for a long life
  • Mounts to the rear of the Dust Extractor.
  • For the convenient transportation of mobile dust extractors

452921 CT Dust Extractor Handle for CT 22/33

CT Dust Extractor Handle improves mobility for the Festool CT 22 and CT 33 Dust Extractors, helping you easily transport your CT to and from the jobsite, or from one shop station to another. Constructed from durable steel tubing with high impact plastic mounting brackets for a long life. Mounts to the rear of the dust extractor.

  • Improves mobility for the Festool CT 22 and CT 33 Dust Extractors
  • Constructed from durable steel tubing with high impact plastic mounting brackets for a long life
  • Mounts to the rear of the Dust Extractor.
  • For the convenient transportation of mobile dust extractors

492753 Boom Arm – Compatible with CT 22 and CT 33 Dust Extractors

Use the Festool CT Boom Arm to keep the cord and hose up and out of your way for more efficient work during sanding, sawing, routing or planing. With an assembled height of 7 ft and a range of motion of 140 degrees, you will virtually eliminate the headaches and inefficiencies associated with tangled cords and hoses. Stabilizer bars straddle the base of the CT Dust Extractor for secure and stable use. Constructed of durable steel tubing for a long service life. Includes a 5 ft electrical extension cord and a 50 mm x 5 ft Antistatic hose with female coupler, allowing a good working length off the end of the boom arm when coupled to the standard 27 mm x 3.5 m hose supplied with the CT Dust Extractor. Requires handle (452921) for mounting onto the CT 22 or CT 33 Dust Extractor. For CT 26 or CT 36, you will need to purchase the CT handle (495802) and Boom Arm Support Bracket (496780).

  • Keep your cord and hose up and out of your way for more efficient work during sanding, sawing, routing or planing
  • Includes a 5 ft electrical extension cord and a 50 mm x 5 ft Antistatic hose with female coupler
  • Height: 7 ft; Range of motion 140 degrees
  • Constructed of durable steel tubing for a long service life
  • Without handle