321830 GH-1440W-1 Geared Head Lathe
The JET exclusive Geared head engine lathe design features precision bearings supporting the hardened and ground spindle and splined, instead of keyed shafts are utilized in the constantly oiled gearbox.
- 1-1/2″ bore spindle supported by precision tapered bearings
- Hardened and ground gears are featured in the headstock and gearbox
- D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
- Headstock is constantly oiled during operation
- Splined, not keyed, shafts are utilized
- Gearbox provides larger threading and feed capabilities with no gear changes
- V-way bed design is induction hardened and ground
- Gap bed section provided for larger diameter work
- Independent leadscrew and feed rod
- Spindle actuation control is apron mounted
Jet/Wilton Cold Saw
JET Coldsaws deliver clean, burr-free cuts and offer machine shop and fabrication professionals a list of features and standard design characteristics that you’ve come to expect from JET.
- Non-Ferrous cold saw
- High speed manual saw
- Mitering capabilities – stops 90°, 45° left and 45° right
- Double self-centering vise for burr free cuts
- Integral coolant system
M1011 24″ Box/Pan Brake
This Pan and Box Brake is an indispensable tool if you need to increase the strength of sheet metal plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, or fixtures. The removable and adjustable fingers can be installed in a variety of positions to accommodate varying widths of metal. The Model M1011 bends mild steels up to 20 gauge thick, 24″ wide, and ranging in angle from 0° to 135°.
M1012 48″ Box/Pan Brake
This Pan and Box Brake is great for forming extra-wide or long pieces of sheet metal. It can bend boxes or pans up to 6″ deep, materials up to 48″ wide and 12 gauge thick mild steels, from 0 to 135 degrees! Removable and adjustable 3″, 4″, and 25″ fingers can accommodate a variety of metal widths.
M1014 7″ x 12″ Metal Cutting Bandsaw
Great for production shops, this 7″ x 12″ Metal-Cutting Bandsaw handles large jobs with ease. Features angle cutting to 45°, four blade speeds, internal coolant system, quick-setting vise, hydraulic downfeed control, and automatic shut-off. Wheels and a handle add mobility for even greater convenience.
- 1 HP, 110V/220V, prewired 110V, single-phase, 12A/6A motor
M1015 6″ x 10″ Mini Metal Lathe
M1015 Shop Fox 6″ x 10″ Mini Metal Lathe is perfect for the mini machine shop enthusiast. The M1015 6″ x 10″ Mini Metal Lathe from Shop Fox is a fantastic lathe for someone who wants a durable and well-designed machine that can fit in a small location. This mini lathe gives toolmakers, gun hobbyists, and the weekend machinist a way to economically produce small precision parts, threaded parts, fittings, and dies. The M1015 has all the features and precision required for small-scale turning and has proven to be a hugely popular machine for scale model building. It includes a 3″ three-jaw chuck, and a full selection of optional accessories is also available for a wide variety of setups. Like all Shop Fox lathes, the M1015 comes with a 2-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.)
- 1/5 HP, 110V, single-phase, 1.2A motor
M1039 1-1/2 HP 20″ Floor Drill Press
The Drill Press is one of the most versatile and handy machines you can add to your shop, and the M1039 (at over 300 lbs.) is the biggest one in our lineup. Woodworkers and metalworkers alike enjoy the huge 18-3/4″ x 16-3/4″ table, speeds from 210–3300 RPM, built-in 110V work light over the table, and a generous 4-3/4″ spindle travel. The table features T-slots and coolant channels—which allows it to be easily outfitted with a vise or clamps—and helps contain cutting fluids when drilling metal.
- 1-1/2 HP, 110V/220V motor
- 20″ swing
- 18-3/4″ x 16-3/4″ table diameter
M1044 52″ 16 Gauge Foot Shear
Cut your work down to size with this heavy-duty Shear. Cut up to 52″ wide, 16 gauge mild steel with all the precision you’d expect from a machine this size. Features a heavy cast-iron body with foot control, precision-ground blade, spring-activated hold-down, safety guard & two micro-adjusting rear stop gauges. Also includes table gauges & front extension arms for those really large sheet metal jobs.
M1052 12″ 3 in 1 Sheet Metal Machine
With 12″ wide capacity and three sheet metal functions in one unit, there is no need to spend extra money and tie up shop space with three single-use machines. You’ll love the convenience and accuracy of these do it all machines!
M1113 Wood/Metal Bandsaw
A VFD (Variable Frequency Drive) with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM, making this saw great for cutting wood and metal alike! Just turn the speed control dial to set the perfect cutting speed for each type of material you’re cutting. Besides providing the variable-speed control, the VFD also allows this machine to take full advantage of the high-torque/low-speed characteristics of a 3-phase motor—while only requiring a single-phase power supply. The vertical cutting configuration and massive cast-iron table also makes it easy to feed intricate, curved cuts. All in all, the strong versatility of this 18″ Vertical Wood/Metal Bandsaw makes it an ideal choice when shop space is limited and the range of profect types is diverse!
W1715 3/4 HP Metal Cutting Bandsaw
This economical, portable, horizontal/vertical metal-cutting bandsaw is an excellent choice for small or large projects where you must cut a variety of metals, plastics, or wood. When the vertical cutting attachment is installed, the saw is able to cut in the same manner as a vertical bandsaw, giving you plenty of options for your unique cutting requirements.
- 3/4 HP, 110V, single-phase, 1725 RPM motor