Shop Fox

W1706 1 HP 14″ Bandsaw

Features such as extruded-aluminum fence and rails, quick-release blade tension, miter gauge, upper and lower ball bearing blade guides, enclosed cabinet stand, hinged wheel covers, 4″ dust port, and a 1 HP motor are all standard. And, with its cast -iron frame and table, this bandsaw will be a reliable shop fixture for many years to come. An optional 6″ extension block kit (D3348) is also available. CSA certified meeting CSA and UL standards!

• Motor: 1 HP, 110V/220V, prewired 110V, single-phase, TEFC, 1725 RPM, 11A/5.5A
• Blade size: 93-1/2″ (1/8″ to 3/4″ wide)
• Precision-ground cast-iron table size: 14″ x 14″ x 1-1/2″
• Cutting capacity (throat): 13-1/2″
• Max. cutting height: 6″
• Table height above floor: 43″
• Blade speeds: 1800 & 3100 FPM
• Cast-iron frame and wheels
• Table tilt: 45° right, 10° left
• Precision-ground cast-iron table
• Cast-iron blade wheels
• Deluxe extruded-aluminum fence
• Ball-bearing blade guides
• Footprint: 18″W x 15-1/2″D
• Heavy-duty cabinet-type stand with storage space
• Quick-change blade release/tensioning
• Upper and lower ball bearing blade guides
• All ball bearing construction
• 4″ dust port
• Includes one 3/8″ blade, fence and miter gauge
• Fence scale with magnifying window

W1825 19″ Heavy-Duty Bandsaw

Power, capacity, and extra features make this 19″ Heavy-Duty Bandsaw the saw of choice for many serious woodworkers. Included is an extra-wide table, deluxe 6″ tall resaw fence that also converts to a low-profile fence, rack-and-pinion table tilt mechanism with built-in table support brace, cast-iron table trunnions, computer-balanced cast-iron wheels with polyurethane tires, and a foot brake. The foot brake not only acts as a safety feature, but it can also speed production. All-in-all, you would be hard-pressed to find a bandsaw with more useful features and proven performance than this outstanding machine. Machines certified to CSA and UL standards may be available upon request.

• Motor: 3 HP, 220V, single-phase, TEFC capacitor start-induction
• RPM: 1725
• Precision-ground cast-iron table size: 26-3/4″ x 19″ x 1-1/2″ thick
• Floor to table height: 37-1/2″
• Cutting capacity/throat: 18-1/4″
• Maximum cutting height: 12″
• Blade length: 143″
• Blade length range: 141-1/2″ – 143″
• Blade width range: 1/8″ – 1-1/4″
• 2 Blade speeds: 1700, 3500 FPM
• Wheels: computer-balanced cast-iron with polyurethane tires
• Wheel covers: pre-formed, hinged steel
• Blade guides: dual ball bearings with full enclosure protection
• Motor bearings: sealed and permanently lubricated
• Blade tension indicator
• Rack-and-pinion table tilt mechanism
• Computer-balanced cast-iron wheels
• Height scale measurement
• Fence with scale and magnifying window
• Deluxe cast-iron fence with deluxe extruded-aluminum resaw fence
• Miter gauge
• Two 4″ dust ports
• Table tilt: 5° left, 45° right
• Quick-change blade release/tensioning
• Rack-and-pinion upper guide adjustment
• Foot brake
• Cast-iron trunnion
• Key lockout safety switch
• Includes 3/4″ hook-style blade

W1770 5 HP 21″ Bandsaw

This 21″ Bandsaw has the power and capacity to handle any bandsaw cutting operation with ease. Its 5 HP motor powers blades up to 1-3/8″ wide through the hardest wood up to 14″ tall. Rigidly constructed to tension the widest blades, this bandsaw eats through wood like a mini saw mill. Features include micro-adjusting rack-and-pinion table tilt, ball bearing blade guides, blade tension indicator, foot brake, deluxe fence with 2-position resaw fence attachment, and precision-ground cast-iron table.

• 5 HP, 230V, single-phase, TEFC capacitor start induction, 1725 RPM, 22A
• Precision-ground cast-iron table size: 29-1/2″ x 20-3/4″ x 1-7/8″ thick
• Table tilt: 45° right, 5° left
• Floor-to-table height: 35-1/2″
• Cutting capacity/throat: 20″
• Max. cutting height: 14″
• Blade length: 165″
• Blade sizes range: 1/4″ – 1-3/8″
• Blade speed: 4600 FPM
• Wheels: computer-balanced cast-iron with polyurethane tires
• Blade guides: dual ball-bearings with full enclosure protection
• Bearings: sealed & permanently lubricated
• Foot brake stop
• Blade tension indicator
• Micro-adjusting rack-and-pinion
• Two 4″ dust ports
• Quick-release blade tension lever
• Rack-and-pinion upper guide adjustment
• Includes deluxe extruded-aluminum rip fence, 1″ blade, and miter gauge

M1113 Wood/Metal Bandsaw

A VFD (Variable Frequency Drive) with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM, making this saw great for cutting wood and metal alike! Just turn the speed control dial to set the perfect cutting speed for each type of material you’re cutting. Besides providing the variable-speed control, the VFD also allows this machine to take full advantage of the high-torque/low-speed characteristics of a 3-phase motor—while only requiring a single-phase power supply. The vertical cutting configuration and massive cast-iron table also makes it easy to feed intricate, curved cuts. All in all, the strong versatility of this 18″ Vertical Wood/Metal Bandsaw makes it an ideal choice when shop space is limited and the range of profect types is diverse!

• Motor: 1-1/2 HP, 220V, 3-phase
• Power supply requirement: 220V, single-phase, 15A
• Max. cutting height: 12″
• Throat capacity: 17-1/2″
• Blade length: 133″
• Blade size range: 1/8″—1-1/4″
• Blade speed: variable, 150-3000 FPM
• Table tilt: 45° right, 5° left
• Floor to table height: 37-1/4″
• Table size: 18″ x 24″
• Left and right table tilting control
• Upper and lower blade guides
• Precision-ground cast-iron table
• Quick-release blade tension
• Steel guide blocks
• Two dust ports
• Wheel brush on lower wheel
• Frequency drive provides variable speed control
• Fully balanced cast-iron wheels with rubber tires
• Rack-and-pinion adjustment on upper blade guide support
• Blade tension scale with magnified cursor
• Twin drive belts
• Includes rip fence and miter gauge
• Rip fence comes with right and left reading indicators, T-slots for quick change attachments, dead lift quick release, ball bearing slide, solid lever lock

M1014 7″ x 12″ Metal Cutting Bandsaw

Great for production shops, this 7″ x 12″ Metal-Cutting Bandsaw handles large jobs with ease. Features angle cutting to 45°, four blade speeds, internal coolant system, quick-setting vise, hydraulic downfeed control, and automatic shut-off. Wheels and a handle add mobility for even greater convenience.

• Motor: 1 HP, 110V/220V, prewired 110V, single-phase, 12A/6A
• Blade size: 93″ x 3/4″
• Max. capacity round @ 90°: 7″
• Max. capacity rectangular @ 90°: 7″ x 12″
• Max. capacity round @ 45°: 5″
• Max. capacity rectangular @ 45°: 4-3/4″ x 4-1/2″
• Blade speeds: 90, 135, 195, 255 FPM
• Coolant capacity: 2-1/2 gallons
• Automatic shut-off
• Hydraulic feed control
• Quick-positioning vise
• Built-in coolant system
• Chip tray
• Includes blade & vertical saw table
• Hydraulic ram assist (adjustable hydraulic downed assist)

W1715 3/4 HP Metal Cutting Bandsaw

Great for production shops, this 7″ x 12″ Metal-Cutting Bandsaw handles large jobs with ease. Features angle cutting to This economical, portable, horizontal/vertical metal-cutting bandsaw is an excellent choice for small or large projects where you must cut a variety of metals, plastics, or wood. When the vertical cutting attachment is installed, the saw is able to cut in the same manner as a vertical bandsaw, giving you plenty of options for your unique cutting requirements.

• Motor: 3/4 HP, 110V, single-phase, 1725 RPM
• Max. cut (round stock) diameter: 4-1/2″
• Max. cut (rectangular stock): 4-1/2″ x 6″
• Blade speeds: 78, 108, 180 FPM
• Blade size: 64-1/2″ x 1/2″
• Automatic shut-off
• Three cutting speeds
• Ball bearing construction
• Vertical cutting attachment
• Handles and wheels for portability
• Blade included

W1667 1/2 HP 8-1/2″ Bench-Top Oscillating Drill Press

SHOP FOX® offers a broad assortment of drill presses to suit every need—from small hobby shops to professional machine shops. Our unique oscillating models provide the convenience of two machines in half the space, and our radial drill presses offer unmatched versatility. For the best selection of features, performance, and value, look no further than SHOP FOX®.

• 1/2 HP, 110V motor
• 8-1/2″ swing
• 7″ x 7″ table size

W1668 13-1/4″ Oscillating Benchtop Drill Press

SHOP FOX® offers a broad assortment of drill presses to suit every need—from small hobby shops to professional machine shops. Our unique oscillating models provide the convenience of two machines in half the space, and our radial drill presses offer unmatched versatility. For the best selection of features, performance, and value, look no further than SHOP FOX®.

• 3/4 HP, 110V motor
• 13-1/4″ swing
• 12-3/8″ table diameter

W1669 1/2 HP 34″ Bench-Top Radial Drill Press

SHOP FOX® offers a broad assortment of drill presses to suit every need—from small hobby shops to professional machine shops. Our unique oscillating models provide the convenience of two machines in half the space, and our radial drill presses offer unmatched versatility. For the best selection of features, performance, and value, look no further than SHOP FOX®.

• 1/2 HP, 110V motor
• 17″ swing
• 9-3/4″ table diamater

W1670 1/2 HP 34″ Floor Radial Drill Press

SHOP FOX® offers a broad assortment of drill presses to suit every need—from small hobby shops to professional machine shops. Our unique oscillating models provide the convenience of two machines in half the space, and our radial drill presses offer unmatched versatility. For the best selection of features, performance, and value, look no further than SHOP FOX®.

• 1/2 HP, 110V motor
• 33-1/2″ swing
• 12-3/16″ table diameter

W1680 1 HP 17″ Floor Model Drill Press

This solid performing drill press is perfect for the average size cabinet shop or small machine shop. With the extra horsepower aluminum finned motor, the Morse Taper #3 spindle for the larger direct mount bits and the closely spaced spindle shaft bearings you have one of the most accurate drill presses in its class. Solid cast iron construction, precision gound table, sealed ball bearings, and rubber coated quick-adjust handles provide the quality and convenience you want in a machine investment. We even added a built-in light so you can see what you’re doing.

• 1 HP, 110V motor
• 17″ swing
• 14″ table diameter

M1039 1-1/2 HP 20″ Floor Drill Press

The Drill Press is one of the most versatile and handy machines you can add to your shop, and the M1039 (at over 300 lbs.) is the biggest one in our lineup. Woodworkers and metalworkers alike enjoy the huge 18-3/4″ x 16-3/4″ table, speeds from 210–3300 RPM, built-in 110V work light over the table, and a generous 4-3/4″ spindle travel. The table features T-slots and coolant channels—which allows it to be easily outfitted with a vise or clamps—and helps contain cutting fluids when drilling metal.

• 1-1/2 HP, 110V/220V motor
• 20″ swing
• 18-3/4″ x 16-3/4″ table diameter

W1678 5 HP 26″ Drum Sander

Whether quickly sanding large quantities of panel assemblies or achieving “tear-out” free finishes on figured wood, the Model W1678 performs like a champ in even the most demanding shops. At a full 26″ wide, this Dual Drum Sander can be fitted with two different grits, allowing both rough and finish sanding in one pass.

• Sanding motor: 5 HP, 220V, single-phase, 3450 RPM, 25A
• Conveyor motor: 1/3 HP, 60V DC, 2A
• Drum surface speed: 2300 FPM
• Max. stock dimensions: 26″W x 4-1/4″H
• Feed rates: variable (0–20 FPM)

W1772 10 HP 37″ Drum Sander

Designed for production shops, this 37″ sander has what it takes to get those big jobs done—fast. Sand boards and panels up to 4″ thick and 36-1/2″ wide, using two different abrasive grits in the same pass with the dual 6″ sanding drums. Feed speed is adjustable from 6 to 18 FPM. The variable-speed knob conveyor adjustment and amp meter make it easy to monitor the sanding load to ensure maximum efficiency. Other great features include a hinged hood, emergency stop bar, pedestal-mounted controls, four 4″ dust ports, and a 10 HP, 240V, single-phase motor. 

• Sanding drum motor: 10 HP, 240V, single-phase, TEFC, 1725 RPM
• Conveyor motor: 1/3 HP
• Drum surface speed: 2800 FPM
• Max. board width: 36-1/2″
• Max. board thickness: 4″
• Min. board length: 9″
• Min. board thickness: 1/16″

W1854 18″ 1.5 HP Open-End Drum Sander w/Variable-Speed Feed

Our 18″ Open-End Drum Sander offers a lot of sanding capacity in a small amount of floor space. Sand stock up to 36″ wide and 4-1/2″ thick! Unlike other open-end drum sanders, the table moves up and down instead of the head. This means drum support is much more rigid during sanding operations, giving you more consistent results. Check out the rest of the features below and you’ll agree that this feature-packed sander is an incredible value!

• Sanding motor: 1-1/2 HP, 120V, single-phase, 13 Amps
• Sandpaper speed: 2600, 3400 FPM
• Conveyor feed rate: 0-12 FPM
• Maximum stock dimensions: 36″ wide x 4-1/2″ thick
• Minimum board length: 6″
• Minimum board thickness: 1/8″
• Sanding drum size: 4″
• Dust collection port: 4″
• V-belt drive
• Steel construction
• 18″ x 44-1/2″ abrasive conveyor belt

W1845 6″ x 108″ Oscillating Edge Sander 3 HP

Built for production sanding operations, this 6″ x 108″ Oscillating Edge Sander is the go-to machine in any shop. Not only does it produce glass-like smooth surfaces, it also doubles as an oscillating spindle sander with three spindle drum sizes for contour sanding. Adjustable tables ensure even wear across the entire belt (or drum) for maximum life and value. Top it off with an ability to position the platen horizontally or vertically, a belt speed of 3150 FPM, effective dust-capturing hoods, and built-in storage, and you’ve got the ultimate in Oscillating Edge Sanders.

• Motor: 3 HP, TEFC, 240V, single-phase, 11A, 1725 RPM
• Table size: 35-1/2″ x 12″
• Table travel: 4″
• Aux. table size: 10″ x 11-1/2″
• Aux. table travel: 10″
• Sanding belt size: 6″ x 108″
• Sanding belt speed: 3150 FPM

W1745 6″ Jointer with Mobile Base

The oversized fence on this 6″ Jointer provides tremendous control for edge-jointing wide boards and features a rack-and-pinion adjustment mechanism. The fine-adjust handwheel dials in the outfeed table relative to the cutterhead top dead center. The lever-adjusted infeed table provides quick and accurate infeed table movement. Made of rugged cast iron. Certified to CSA and UL standards!

• 1 HP, 120V, single-phase, 13A motor

W1858 8″ Dovetail Jointer with Helical Cutterhead & Mobile Base

With an extra long bed, pedestal-mounted magnetic switch, a built-in mobile base, heavy duty cast iron hand wheels and Taiwanese build quality, you’d be hard pressed to find an 8″ jointer offering so much for so little. So, step up from any 6″ model you might be considering to this larger capacity unit and rest easy knowing you made a great choice! CSA certified meeting CAN/CSA C22.2 #71.2-10 and UL 987 standards!

• 3HP, 230V, single phase motor

8″ x 76″ Parallelogram Jointer with Mobile Base

This 8″ Parallelogram Jointer features extra-long infeed and outfeed tables that can be adjusted transversely and longitudinally to each other for ultra-precision face flattening and edge jointing. Table levers with positive table locks provide quick and precise height adjustments, and the pedestal-mounted magnetic switch is conveniently located for easy on and easy off.

• 3 HP, 230V, single-phase motor

W1758 16″ x 46″ 2 HP Variable-Speed Wood Lathe

A fully featured, large-capacity wood lathe at a competitive price! Featuring a hefty 2 HP motor, variable-speed spindle, a swivel-head for outboard turning, a digital tachometer for setting the exact spindle speed, precision-ground cast-iron bed, headstock and tailstock for quick locks, and heavy cast-iron legs with floor-mounting holes for the ultimate in stability. Go ahead. Try one out for yourself. This beauty will handle it all!

• Motor: 2 HP, 110V, single-phase, 14A
• Swing over bed: 16″
• Distance between centers: 46″
• Heavy-duty, precision-ground cast-iron bed and cast-iron legs ensure stability and minimal vibration
• 1″ x 8 TPI RH headstock spindle
• Spindle tachometer with digital readout
• MT#2 spindle & tailstock tapers
• Spindle bore: 3/8″
• Tool rest extension arm
• Variable speeds: 600-2400 RPM
• Quick lock/release levers for tailstock & headstock
• Headstock rotation: 0°, 60°, 90°, 120°, 180°
• 6″ faceplate
• MT#2 spur center
• MT#2 live center
• Tool rest with swivel arm extension
• Overall dimensions: 72-1/2″L x 19″W x 48″H

W1836 12″ x 15″ Benchtop Wood Lathe

The Shop Fox® W1836 Wood Lathe is packed with features that woodturners love. A powerful 3/4 HP motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments make this lathe a top choice. 24 indexes in increments of 15º allow evenly spaced cuts while the headstock stays in a locked position, which opens new possibilities not available on most benchtop lathes. Heavy-duty cast-iron construction and rubber feet for increased stability and smooth turning operations.

• Motor: 3/4 HP, 110V, universal, 7.4A
• Electronic variable-speed spindle control with digital RPM display
• 12″ swing over bed
• 15″ between centers
• 9″ swing over tool rest base
• Two spindle speed ranges: 500-1800 RPM & 1000-3800 RPM
• 1″ x 8″ TPI RH thread spindle size
• Spindle indexing in 15-degree increments
• Heavy-duty cast-iron construction and rubber feet for increased stability and smooth turning
• Included tool holder, knockout bar, work lamp, live center, spur center and 3″ faceplate

M1011 24″ Box/Pan Brake

This Pan and Box Brake is an indispensable tool if you need to increase the strength of sheet metal plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, or fixtures. The removable and adjustable fingers can be installed in a variety of positions to accommodate varying widths of metal. The Model M1011 bends mild steels up to 20 gauge thick, 24″ wide, and ranging in angle from 0° to 135°.

M1012 48″ Box/Pan Brake

This Pan and Box Brake is great for forming extra-wide or long pieces of sheet metal. It can bend boxes or pans up to 6″ deep, materials up to 48″ wide and 12 gauge thick mild steels, from 0 to 135 degrees! Removable and adjustable 3″, 4″, and 25″ fingers can accommodate a variety of metal widths.

M1014 7″ x 12″ Metal Cutting Bandsaw

Great for production shops, this 7″ x 12″ Metal-Cutting Bandsaw handles large jobs with ease. Features angle cutting to 45°, four blade speeds, internal coolant system, quick-setting vise, hydraulic downfeed control, and automatic shut-off. Wheels and a handle add mobility for even greater convenience.

• 1 HP, 110V/220V, prewired 110V, single-phase, 12A/6A motor

M1015 6″ x 10″ Mini Metal Lathe

M1015 Shop Fox 6″ x 10″ Mini Metal Lathe is perfect for the mini machine shop enthusiast. The M1015 6″ x 10″ Mini Metal Lathe from Shop Fox is a fantastic lathe for someone who wants a durable and well-designed machine that can fit in a small location. This mini lathe gives toolmakers, gun hobbyists, and the weekend machinist a way to economically produce small precision parts, threaded parts, fittings, and dies. The M1015 has all the features and precision required for small-scale turning and has proven to be a hugely popular machine for scale model building. It includes a 3″ three-jaw chuck, and a full selection of optional accessories is also available for a wide variety of setups. Like all Shop Fox lathes, the M1015 comes with a 2-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.)

• 1/5 HP, 110V, single-phase, 1.2A motor

M1039 1-1/2 HP 20″ Floor Drill Press

The Drill Press is one of the most versatile and handy machines you can add to your shop, and the M1039 (at over 300 lbs.) is the biggest one in our lineup. Woodworkers and metalworkers alike enjoy the huge 18-3/4″ x 16-3/4″ table, speeds from 210–3300 RPM, built-in 110V work light over the table, and a generous 4-3/4″ spindle travel. The table features T-slots and coolant channels—which allows it to be easily outfitted with a vise or clamps—and helps contain cutting fluids when drilling metal.

• 1-1/2 HP, 110V/220V motor
• 20″ swing
• 18-3/4″ x 16-3/4″ table diameter

M1044 52″ 16 Gauge Foot Shear

Cut your work down to size with this heavy-duty Shear. Cut up to 52″ wide, 16 gauge mild steel with all the precision you’d expect from a machine this size. Features a heavy cast-iron body with foot control, precision-ground blade, spring-activated hold-down, safety guard & two micro-adjusting rear stop gauges. Also includes table gauges & front extension arms for those really large sheet metal jobs.

M1052 12″ 3 in 1 Sheet Metal Machine

With 12″ wide capacity and three sheet metal functions in one unit, there is no need to spend extra money and tie up shop space with three single-use machines. You’ll love the convenience and accuracy of these do it all machines!

M1113 Wood/Metal Bandsaw

A VFD (Variable Frequency Drive) with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM, making this saw great for cutting wood and metal alike! Just turn the speed control dial to set the perfect cutting speed for each type of material you’re cutting. Besides providing the variable-speed control, the VFD also allows this machine to take full advantage of the high-torque/low-speed characteristics of a 3-phase motor—while only requiring a single-phase power supply. The vertical cutting configuration and massive cast-iron table also makes it easy to feed intricate, curved cuts. All in all, the strong versatility of this 18″ Vertical Wood/Metal Bandsaw makes it an ideal choice when shop space is limited and the range of profect types is diverse!

W1715 3/4 HP Metal Cutting Bandsaw

This economical, portable, horizontal/vertical metal-cutting bandsaw is an excellent choice for small or large projects where you must cut a variety of metals, plastics, or wood. When the vertical cutting attachment is installed, the saw is able to cut in the same manner as a vertical bandsaw, giving you plenty of options for your unique cutting requirements.

• 3/4 HP, 110V, single-phase, 1725 RPM motor

W1717 1/3 HP Horizontal / Vertical Sander

Taking advantage of the quick-change belt system and the single-knob belt tracking control, this Horizontal/Vertical Belt Sander makes it quick and easy to edge and contour sand using a selection of sanding belts. For increased versatility or for sanding long or wide stock, the sander tilts from horizontal to vertical. Tables are height adjustable.

• Motor size: 1/3 HP, 110V, 3450 RPM, 4A
• Belt size: 4″ x 36″
• Belt speed: 2100 FPM
• Quick-change belt system

W1815 15” Disc Sander with Brake

This stationary 15″ disc sander is a real workhorse in any shop. The precision-ground cast-iron table and disc platen produce true, flat edges from 45° to 90°. Whether finishing long edges and end grain, or simply “working to the line,” this Disc Sander will prove to be invaluable. Features include X- and Y-axis miter slots, cabinet stand with storage shelf, and an electronic brake system that stops the disc within 3 seconds after power is switched off.

• 1-1/2 HP, 220V, single-phase, 1725 RPM, 12A
• Disc: 15″ PSA
• Table tilt: +15 to -45°
• Precision-ground cast-iron table
• Precision-ground cast-iron disc
• Table size: 20″W x 12″D

D3757 Universal Mobile Base Kit

This universal mobile base can be customized to fit any size machine base with your own cut-to-size plywood. Sturdy corner brackets attach with through-bolts for tremendous strength. Kick-stand casters provide easy mobility, and the adjustable feet provide stability during stationary machine use.

• Accepts 3/4″ thick plywood (not included)
• Includes two fixed caster brackets and two swivel caster brackets
• 600 lb. max. capacity

D4666 Industrial Mobile Base

There’s no need to bend down to set or release the mobile mechanism on these mobile bases. Simply step on the foot lever to activate the height-adjustable leveling feet on two of the corners, and your equipment is locked in place. Then, when the work is done and it’s time to move the equipment, flip up the levers with your toe, and you’re easily mobile on the smooth rolling extreme-duty casters. We also placed the adjustment bolts along the edge of the adjustment bars for secure double-axis and double-contact rigidity. Adjusts from 19″ x 21″ to 29-1/2″ x 29-1/2″.

• Heavy-duty rubber and steel casters with sealed bearings
• Reinforced/welded caster posts
• Adjustable positive stop/rubber leveling feet
• 2 fixed casters and 2 swivel casters
• Easy-float, spring-loaded toe-flip lifting levers
• Single-point bi-axis engagement bolts
• 1200 lb. capacity
• Adjusts from 19″ x 21″ to 29-1/2″ x 29-1/2″
• Clearance from floor: 2-3/16″

D2057A Adjustable Mobile Base – Heavy-Duty

A paragraph here if neeWith a 700-pound capacity, the D2057A Heavy-Duty Mobile Base from Shop Fox is designed to give you a stable and mobile platform upon which to mount machinery and equipment having a variety of base sizes and weights. The base can be assembled in any of eight configurations providing maximum flexibility of use. The unique two-piece retractable feet use rare earth magnets to allow the knob to turn while the foot pad is tight to the floor. The heavy-duty casters are arranged on outrigger–allowing the machine to sit as low as possible and yet be extremely stable. Swivel casters on two corners provide excellent maneuverability. The bolt pattern on the fixed caster side allows orientation of the wheels in either of two directions. If your mobile base came with red casters, their replacements will be the D2604 3″ Red Polyurethane Fixed Caster or the D2607 3″ Red Polyurethane Swivel Caster. If your mobile base came with black casters, their replacements will be the D4173 Hard Rubber Swivel Caster or the D4174 Hard Rubber Fixed Caster.

• 20″ x 20″ to 29-1/2″ x 29-1/2″
• Corner pads measure 4″ square
• 700 lb. max. capacity

D2058A Adjustable Mobile Base – Extra Heavy-Duty

Shop Fox® Heavy Duty Mobile Bases are designed to give you a stable and mobile platform upon which to mount machinery and equipment having a variety of base sizes and weights. The heavy-duty metal casters are arranged on outriggers allowing the machine to sit as low as possible and yet be extremely stable. Swivel casters on two corners provide excellent maneuverability. The bolt pattern on the fixed caster side allows orientation of the wheels in either of two directions. The base can be assembled in any of eight configurations providing maximum flexibility of use. The unique two piece retractable feet use rare earth magnets to allow the knob to turn while the foot pad is tight to the floor. You will find these mobile bases to be far superior to any mobile base on the market in strength, adjustability and movability. This patented mobile base is the most stable on the market with outrigger type supports. Adjusts from 18-1/2″ x 24-1/2″” to 28-1/2″ x 33-1/2″. 1300 lb. maximum capacity.

• 18-1/2″ x 24-1/2″ to 28-1/2″ x 33-1/2″
• Corner pads measure 4″ square
• 1300 lb. Capacity

W1671 3/4 HP Heavy-Duty Mortising Machine

This king of benchtop mortisers is a rugged, high-quality machine with all the features found in the best mortisers made, but with none of their faults. The super heavy-duty fence and hold down eliminate unwanted wood movement and “sticking chisels,” (an all too common complaint), ensuring accurate and fast operation. The unique swiveling base allows easy off-the-bench operations and opens new possibilities for custom mortises. The precision 1/2″ chuck eliminates the need to modify chisels and bits, and the extra height capacity allows the use of stock up to 7-3/8″ thick. The all-steel quick-adjust depth stop is easy to set and provides a positive stop for repeatable operations. With features like an adjustable length, solid-steel quick-positioning handle, 8-piece tool holder, easy two-door chuck access, large base, and twin hardened-and-ground columns, you’ll see why this is one of the most popular mortising machines on the market!

• 3/4 HP, 110V, 3450 RPM, aluminum-finned motor
• Adjustable depth-stop rod
• Hydraulic cylinder for softer releases
• Heavy cast-iron construction
• Extra-long (22″) quick-set handle

W1842 13″ Planer/Moulder

For those woodworkers who want to make their own baseboards, crown moulding, door/window casings, fascia, or architectural mouldings, this 13″ Planer/Moulder is a must-have. And with our full selection of optional moulding knives, processing mouldings in the wood species of choice is generally safer, faster, and more cost-effective than processing mouldings on a shaper. Adjustable guide rails ensure moulding stock runs true from one piece to a hundred pieces, and setting knives is a breeze with the top-accessible cutterhead. Or, remove the guide rails and change over the cutterhead and use this machine as a standard planer for workpieces up to 13″ wide or 6″ high.

• 1.5 HP, 110V/220V, prewired 110V, single-phase, 15A/7.5A motor
• 13″ maximum cutting width
• 6″ maximum lumber height
• 1/8″ (planing) maximum cutting depth
• 3/4″ (moulding) maximum profile depth

W1862 15″ Planer

Produced in a factory renowned for innovation and dependability, this 15″ Planer with a three-knife cutterhead has all the features you’d expect in a top-quality planer, but at a surprisingly affordable price. Standard features include two-speed gear box with oil-bathed gears, magnetic switch with overload protection, precision-ground bed with bed rollers, board return rollers, and 4 heavy-duty support columns with dual table locks for rigid and accurate performance. CSA Certified.

W1863 15″ Planer with Helical Cutterhead

No corners were cut when putting together this feature-rich 15″ planer. With its 4-flute helical cutterhead, 52 indexable four-sided carbide inserts, and two-speed gearbox, ultra-smooth surfacing is the new normal, even on figured grain. Other features include a pedestal-mounted switch, precision-ground cast-iron infeed and outfeed tables, and large board return rollers for efficient production. CSA certified.

15” 3 HP Fixed-Table Planer

The 15″ Fixed Table Planer features a powerful 3 HP motor and 5200 RPM, 3-HSS knife cutterhead. What makes this planer unique is the fixed table height that is ideal for setting up with permanent infeed and outfeed roller tables allowing for greater efficiency in production settings. The 2-speed gearbox allows you to choose between 16 and 28 FPM for a smooth finish or high-production feed rate. The headstock sits atop a sturdy four-column support with easy handwheel height adjustment thanks to the twin gas struts on either side.

W1713 16″ Variable-Speed Scroll Saw

Variable-speed blade control, extra-large cutting capacity, and cast-iron construction are the most sought after features in a Scroll Saw. This Shop Variable-speed blade control, extra-large cutting capacity, and cast-iron construction are the most sought after features in a Scroll Saw. This Shop Fox® Scroll Saw offers all these features and a gooseneck work light, dust blower, dust port, large 45° tilt table, and easy blade change mechanism. Uses plain and pin-end saw blades.

• 1/8 HP, 120V, 1.2A motor
• Variable-speed motor
• 2″ maximum cutting thickness
• 16″ maximim cutting width

W1872 16″ VS Scroll Saw with Foot Switch, LED, Miter Gauge, & Rotary Shaft

Variable-speed blaNot just your average Scroll Saw, this feature packed saw included a foot pedal for motor control, flexible shaft rotary tool attachment, LED work light, dust blower, X/Y axis miter gauge, and pinless blade adapter. Variable speed foot control will handle any scroll saw application.

• 1/8 HP, 120V, 0.6A motor
• Variable-speed motor
• 2-1/4″ maximum cutting thickness
• 16″ maximim cutting width

W1674 2 HP Shaper

We designed this Shaper for maximum performance at an affordable cost, with 25% more power and 40% more weight than other shapers in its price range. This shaper is simply a time-tested and proven design that won’t let you down.

• 2 HP, 120V/240V, prewired 240V, single-phase, 18A/9A motor
• 24″ x 21″ table
• 1/2″ & 3/4″ spindles included
• 3″ spindle travel

W1701 1-1/2 HP Shaper

This 1-1/2 HP Shaper provides the best of all worlds – a rock solid router table, which allows the use of most 1/4″ and 1/2″ shank router bits, as well as a powerful shaper, which opens up a new realm of 1/2″ bore shaper cutters. A split adjustment fence also makes edge jointing and full edge profiling safe and easy. This Shaper should be a part of every woodshop. CSA certified meeting CSA C22.2 #71.2-10 and UL 987-8 standards!

• 1-1/2 HP, 120V/240V, 15A/7.5A, single-phase, 10A, 3450 RPM, reversible motor
• 24-1/4″ wide x 19″ deep table with 3/4″ miter slot
• 7/8″ spindle travel

W1763 2-1/2 HP Shaper

Our affordable heavy-duty 2-1/2 HP shaper with all of the features of its bigger brothers and more: Built-in mobile base, precise spindle elevation gauge, ratcheting fence locks with independent left and right micro-adjustment, precision ground cast iron table, fully adjustable cutter guard, easy-to-change 2-speed belt drive, and convenient pedestal controls.

• 2-1/2 HP, 220V, 9.5A, single-phase motor
• 28″ x 30″ table
• 1/2″ & 3/4″ spindles included
• 1/4″ & 1/2″ router bit collets included
• 3″ spindle travel

W1686 1 HP Oscillating Spindle Sander

No expense has been spared to bring you this feature packed spindle sanding monster! With a whopping 25-1/4″ x 25-1/4″ precision-ground cast-iron table, no other machine comes close to SHOP FOX® in size and capacity. The heavy-duty trunnion assembly will effortlessly support your heaviest oversized workpieces and the 1 HP motor will gracefully sculpt the hardest woods.

• Motor size: 1 HP, 120V/240V, pre-wired 120V, 12A/6A, TEFC motor
• Precision-ground cast-iron table
• Ten spindle sizes: 1/4″ x 5″, 3/8″ x 6″, 1/2″ x 6″, 5/8″ x 6″, 3/4″ x 9″, 1″ x 9″, 1-1/2″ x 9″, 2″ x 9″, 3″ x 9″, 4″ x 9″, tapered and threaded
• Table tilt: 45° front and 20° back
• Table size: 25-1/4″L x 25-1/4″W
• Spindle speed: 1725 RPM
• Oscillation speed: 72 SPM

W1888 10″ Hybrid Table Saw With Riving Knife

This hybrid table saw stands out from the crowd with innovative features, such as a fully enclosed blade guard with its own separate dust port, an easy-glide, two position fence system that quickly converts for narrow ripping, and a quick-release spreader/riving knife for easy changeovers. Combine those features with the heavy-duty cast-iron table, trunnions, and blade adjustment handwheels, as well as sturdy preformed steel cabinet, and you have a solid machine that beats all others in its class.

• Motor: 2 HP, 115V/230V (prewired 115V), single-phase, 16A/8A
• Rip capacity: 31-1/2″ right, 11-3/8″ left of blade
• Max depth of cut at 90 degrees: 3-1/8″
• Max depth of cut at 45 degrees: 2-1/8″
• Table Size: 40-1/8″ x 27″
• Distance from front of table to center of blade: 16-1/4″
• Floor-to-table height: 34-1/4″
• Arbor diameter: 5/8″
• Arbor speed: 4000 RPM
• Max width of dado: 13/16″
• Dust port size: 4″
• Dimensions: 63″ x 40″ x 48″
• Footprint: 19-1/2″ x 20-1/2″

W1837 10″ 2 HP Open-Stand Hybrid Table Saw

The best features of the cabinet and contractor saws combined into a hybrid saw. This W1837 10″ Open Stand Hybrid Table Saw features cabinet-mounted cast-iron trunnions and a prewired 120V 2 HP motor. Thanks to the hybrid design, cutting capacities are not diminished and stand toe-to-toe with the most expensive cabinet saws in the market. The serpentine belt and pulley system lends to a smoother and quieter operation with better power transfer than a standard V-belt drive system. The enclosed steel upper-stand with 4″ dust port allows for maximum dust containment. The fence features easy lift-off and adjustability to create a simpler and more enjoyable user experience. Like a contractor-style saw, its low weight and built-in mobile base allow it to be easily moved where you need it. This hybrid saw is sure to be the envy at any shop or worksite.

• 2 HP, 120V/240V, single-phase (prewired for 120V)
• Amps: 15A at 120V, 7.5A at 240V
• Blade tilt: Left, 0°–45°
• Table height from floor: 35-3/4″
• Table size with extension wings: 40-1/4″ x 27″
• Arbor speed: 3450 RPM
• Maximum dado width: 13/16″
• Maximum depth of cut: 3-1/4″ at 90°, 2-1/4″ at 45°
• Rip capacity: 30″ to right, 15″ to left
• 4″ dust port
• Weight: 243 lbs
• Precision-ground cast-iron table with steel extension wings
• Cabinet-mounted cast-iron trunnions
• Quick removal/replacement system for blade guard and riving knife
• Lift-off fence with front/rear locking ability and T-slots for mounting accessories, such as Board Buddies or Featherboards
• Built-in mobile base for easy maneuvering
• Includes a 10″ x 40-tooth carbide-tipped blade, standard and dado table inserts, t-slot miter gauge, push stick, and arbor wrenches