Laguna

14|12 1.75HP Bandsaw

The 14|12 Bandsaw is a 110 Volt saw that feels like a 220. Features include pyramid shaped spine, 1.75 HP TEFC Motor, quick release tension, 115 volt outlet and micro polished 21″ x 16″ table mounted onto oversized Trunion paired with Aluminum Hi/Low Fence. Solid Cast Wheels are electronically, dynamically balanced & fitted with polyurethane one-piece tires designed to run cooler & last longer than conventional tires. The worm gear & pinion is ultra-smooth and engineered to have minimum flex even when fully extended. This is a trade mark of Laguna, just like the famous ceramic Laguna guides. Double windows allows you to check both tension & tracking while the machine is running.

• Laguna Guides
• 4″ Dust Port
• Table Height: 38″
• 110 Volt Outlet
• Tension Window
• Tension Indicator
• Tracking Window
• Cast Iron Wheels

14|BX Bandsaw

• 12″ Resaw
• Height: 70-1/4″
• 21-1/2″ X 16″ Table
• Table Height: 38″
• 7° Table Tilt Left
• 2 X 4″ Dust Ports

Differences from 14|12:

• Weight increased
• Solid one-piece Frame
• Frame is heavier Gauge
• Magnetic On/Off Switch
• Disc-Brake w/ Micro-Switch
• Dual light mounting positions

18|BX 1PH 3HP 220V Bandsaw

The 18|BX Bandsaw follows in the traditions of high-performance and reliability established by the widely-used Laguna Tools 14|12 and 14|bx models. The 18|bx is built around a 3HP, 220V motor and 145″ (368 cm) blade for consistent results, cut-after-cut, regardless of wood material. 

• Motor: 3HP, 220V, 1 Ph. 12 Amp.
• Recommended Breaker: 20 Amp.
• Magnetic Starter
• Min-Max Blade Width: 1/8″ – 1-1/4″
• Resaw Capacity: 16″
• Throat: 18″
• Blade Length: 145″

6|89T Edge Sander

Laguna’s 6|89T Edge Sander is a horizontal/vertical sanding machine with swing function of the sanding belt. It features a 10″ x 12″ end table with dust shroud, a footprint of only 51″ x 20″ x 45″, and a belt speed of as high as 3,900 RPM.

• Motor: 1.5 HP, 110 V, 18 amp
• RPM: 3,450
• Belt Size: 6″ x 89″
• Front Table: 10″ x 30″
• Table Heights: 38″ min. – 41″ max.

JX|8 PRO ShearTec: II Jointer – Parallelogram

All-new for 2021, the Laguna JX|8 ShearTec II is loaded with highly desirable features to make jointing safer and more enjoyable. The JX|8 is available in 2 versions. This version is the 220 volt 3 HP version.

• Parallelogram Table Adjustments – Table depth adjustments travel along an arc to keep the same distance to the cutterhead through its travel
• Emergency “Knee-Stop” – The new knee stop uses a body-length bar at knee height to shut off the JX jointer. This important safety feature allows the machine operator to stop the machine quickly at any position along the front of the machine while keeping hands on the workpiece.
• New Ergonomic Machine Body – The new JX Series machine body has been redesigned with a “toe-kick” to allow the user to position themself closer to the machine tables and to move safer and easier along the length of the machine.
• In-feed Support Roller – Infeed tables are now fitted with pull-out support roller to help support longer materials.
• ShearTec II Cutterhead – The ShearTec II cuttherhead comes as standard equipment on JX|8 ShearTec II Jointer. The ShearTec II is a 6-row carbide insert cutterhead that produces a superior surface finish on all woods including challenging hardwoods. The ShearTec II knives and fasteners have a T-step design to maximize clamping force on the knives preventing knife cracking and chatter. The 4-sided carbide insert knives produce a shear cut for flawless results. The ShearTec II cutterhead has deep grooves that make the cutterhead very quiet and improve shaving ejection. The 4-sided knives can be rotated for a new cutting edge without need for a knife setting jig.
• Built-In Wheels – No need to purchase a separate mobility kit.
• Cast-Iron Tables and Fence

REVO 12|16

The definitive midi-lathe, Laguna’s REVO 12|16 encapsulates the prestige of Laguna in a small package. Featuring a Pulse Width Modulation system motor to maintain consistent torque at any speed, one step cam-action belt change with magnetic door housing, and a luxury banjo w/45º chamfered edge.

• 1 HP DC Permanent Magnet Motor
• Pulse Width Modulation (PWM) Controller

Revo 18|36 Lathe 220 Volt

A paragraph here if needed. This can be deleted. A paragraph here if needed. This can be deleted. A paragraph here The first feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe. The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength. Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle. The headstock & tailstock lock handles are situated on the back to eliminate any interruptions to your work flow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection.

• Electrical: 2HP, 220 Volt, 60 hz
• Motor: Induction, 1725 RPM, TEFC
• VFD: Delta S1 Variable Frequency Drive

Revo 24|36 Lathe 220 Volt

Wall Thickness of legs on the Revo 24|36 is 80% heavier compared to the Revo 18|36.

Redesigned banjo features a more compact design, 45° cutout & wider base.

Having a second control panel that mounts in two positions (high or low) sets the Revo 24|36 apart from any other lathe in the world, not only can you turn off the machine from this control panel, but it allows the operator to change speed as well. A switch on the back of the headstock designates whether you control the Revo from the headstock control panel or the corresponding control panel. The E Stop works on both at any given time.

• Motor: Induction, 1725 RPM, 3HP, 220V, 60Hz
• Phase: 1-Phase Input, 3-Phase Output
• VFD: Delta S1 Variable Frequency Drive

PX|12

Brand new to the Laguna lineup is the all-new PX|12 benchtop planer featuring the new QuadTec I cutterhead. The Laguna PX|12 QuadTec I is loaded with premium features to make woodworking safer and more enjoyable.

• QuadTec I – The new QuadTec I delivers what woodworkers want most in a compact package by providing a quiet, long-lasting performance with its 26 carbide The carbide inserts last longer than traditional planer knives and are 4 sided to provide a fresh cutting edge when rotated. The QuadTec I is a game changer when planing tricky grain in hardwoods
• 2 HP Motor – The 2 HP motor provides plenty of power for this Best-in-Class benchtop planer. The motor spins the cutterhead at 10,000 RPM to provide the smoothest possible finish
• Pull Out Extensions – The pull-out extensions and flip-down extensions make it easier to feed stock through the machine

PX|20

The all-new PX|20 planer signals an innovative new design for Laguna planers. The Laguna PX|20 is loaded with new ergonomic features to make woodworking safer and more enjoyable.

• Infeed and Outfeed Rollers – The PX|20 features infeed and outfeed rollers to assist with material loading and feeding while keeping a compact footprint
• Digital Readout – The DRO has been moved to the control panel to provide better ergonomics and make precision settings easier
• Ergonomic Control Panel – Machine controls have been moved to the control panel at the top of the machine and angled toward the machine operator for easy access and better visibility. Combined with the new cabinet, the PX|20 sports a sleek, modern design
• Improved Dust Collection – The 4″ diameter dust chute offers the option to point to right or left to optimize dust collection system layout
• 4-Post Bed Support – Provides precise and consistent performance with every cut
• ShearTec II Cutterhead – The ShearTec II cuttherhead comes as standard equipment on PX|20 Planer. The ShearTec II is a 6-row carbide insert cutterhead that produces a superior surface finish on all woods including challenging hardwoods. The ShearTec II knives and fasteners have a T-step design to maximize clamping force on the knives preventing knife cracking and chatter. The 4-sided carbide insert knives produce a shear cut for flawless results. The ShearTec II cutterhead has deep grooves that make the cutterhead very quiet and improve shaving ejection. The 4-sided knives can be rotated for a new cutting edge without the need for a knife setting jig
• Serrated Infeed Roller – The serrated infeed roller and pressure bar are mounted close to the cutterhead to virtually eliminate snipe

SS|14 Spindle Sander

Laguna’s SS|14 Spindle Sander is a versatile sander that comes standard with a stand, 4 inserts, and 6 spindles, including a 3″ diameter bonus spindle.

• Motor: 1/2 HP, 110 V, 7.5 amp
• RPM: 1,725
• Oscillation Stroke: 15/16″
• Oscillations/Minute: 29

F1 Fusion Tablesaw

The new Laguna Fusion Table Saws are unlike any saw on the market. Having the same quality demands earned through the original fusion table saw, the new fusion line will not only impress but exceed the expectations you have come to expect from Laguna. With a completely redesigned trunnion and arbor controls that focuses on buttery smooth controls and longevity of the saw, we are sure this is the saw that will give you the perfect rip cut for many many years.

• 1.5HP TEFC Motor
• 110V, Single-Phase, 60Hz Power Requirement
• Fusion Dust Collection System
• Polished Cast Iron Table
• Included Tools & Integrated Tool Storage
• Included 10 x 60T Carbide-Tipped Blade

* Machine shown with Optional Wheel System

F2 Fusion Tablesaw

The new Laguna Fusion line was developed for demanding woodworkers. Designed around quality components with an emphasis on superior dust collection enhanced by utilizing over/under collection & sealed bottoms.

All models are equipped with a precision fence, plus the F2 & F3 feature the Hi/Low aluminum extrusion known from European saws. The hybrid fence on the Laguna Fusion offers the best of European and American fence features. This fence is NOT designed to be used on the LEFT side of the blade! Rail or tube on the LEFT side is provided only to make the ON/OFF switch position. Permanently lubricated bearings & Acme screws are part of the internal DNA. Fusion 2 is the true successor to the original Fusion Table Saw. The task was simple: make a saw that was more refined, more precise, and cleaner.

• Newly designed arbor lock to change blades quickly and easil
• Quick release riving knife for hassle-free riving knife changes
• 1.75HP TEFC Motor
• 110V, Single-Phase, 60Hz Power Requirement
• Fusion Dust Collection System
• Cabinet Mounted Design
• Included Tools & Integrated Tool Storage
• Included 10 x 60T Carbide-Tipped Blade

F3 Fusion Tablesaw

The new Laguna Fusion line was developed for demanding woodworkers. Designed around quality components with an emphasis on superior dust collection enhanced by utilizing over/under collection & sealed bottoms.

All models are equipped with a precision fence, plus the F2 & F3 feature the Hi/Low aluminum extrusion known from European saws. The hybrid fence on the Laguna Fusion offers the best of European and American fence features. This fence is NOT designed to be used on the LEFT side of the blade! Rail or tube on the LEFT side is provided only to make the ON/OFF switch position. Permanently lubricated bearings & Acme screws are part of the internal DNA. Fusion 3 is the true successor to the original Fusion Table Saw. The task was simple: make a saw that was more refined, more precise, and cleaner.

• 3HP TEFC Motor
• 220V, Single-Phase, 60Hz Power Requirement
• Fusion Dust Collection System
• Industrial Cabinet, Fence & Trunnions
• Included Tools, Tables & Integrated Tool Storage
• Included 10 x 60T Carbide-Tipped Blade