Grizzly

H6246 Heavy-Duty Meat Saw with Sliding Table

• This heavy-duty meat saw takes the chore out of meat processing with its large stainless-steel sliding table dual fences and built-in sausage grinder
• A 3/4 hip motor provides plenty of power for all-day use
• And when you-Inched done this saw disassembles for easy cleaning

G0513ANV 17″ 2HP Bandsaw Anniversary Edition

The fully-featured G0513 17″ 2 HP Bandsaw has a 2 HP motor that powers through wood up to a maximum 12″ cutting capacity. The 16-1/4″ throat offers lots of room to move your workpieces around. Features including the deluxe fence, heavy-duty miter gauge, dual 4″ dust ports, micro-adjusting geared table and European-style blade guides are usually found on machines costing much more.

• Motor: 2 HP
• Max cutting width: 16-1/4 in.
• Max cutting height: 12-1/8 in.
• Table size: 17 in. x 17 in.
• Wheel type: Computer-Balanced Cast Aluminum
• Blade size: 131-1/2 in.
• Quick blade change: Yes

G7944 14″ Heavy-Duty Floor Drill Press

The G7944 14″ Heavy-Duty Floor Drill Press would be the mainstay in any shop with 12 speeds and powerful 3/4 HP motor. With a max drill capacity of 3/4″ through steel, it can easily drill through fiberglass, plastic and composites. The JT33 keyed drill chuck is fitted to the MT #2 spindle taper and offers up to 3-1/4″ of travel. The chuck accepts drill bits from 3/64″–5/8″. You can set the adjustable depth stop for predetermined and repeatable drilling. The precision-ground cast-iron table is 11-3/8″ x 11-3/8 and tilts 90° left and right. It swivels 360° around the steel column and has four 5/8″ T-slots, 3-7/8″ on center. It also has crank handle operated rack-and-pinion vertical table movement. Additional features include the cushioned grip quill handles, a built-in light and that the table has a coolant trough. Like all Grizzly drill presses, the G7944 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.)

G0846 Horizontal Slot Mortiser

The Grizzly G0846 Horizontal Slot Mortiser incorporates a router mounted on its side with the workpiece clamped to a multi-axis sliding table. Use it to quickly cut mortises for traditional mortise-and-tenon or ‘loose tenon’ joinery and easily cut angled mortises as no elaborate jigs and fixtures are required! The G0846 is driven by a powerful 2-horsepower, 220V, 10-amp motor and is equipped with a 20″ x 8″ precision-ground cast-iron table. The table features an adjustable cam-action hold-down clamp to secure the workpiece. The table glides along two hardened V-ways using four ball bearings for smooth, effortless motion. The table has two adjustable X-axis (side-to-side) stops and one Y-axis (depth) stop. The G0846 has an indexing guide with four spacing patterns that, when combined with the stops, are all crucial for repeat operations and production work.

• Precision-ground, cast-iron table
• Forward and Reverse spindle control
• Combo fence/miter gauge
• Adjustable X- and Y-axis table stops
• Smooth ball-bearing table operation
• Cam-action hold-down clamp
• Locking storage cabinet
• Hex wrench set included

15″ 3 HP Heavy-Duty Planer

Exclusive from Grizzly is our G0815 15″ Heavy-Duty Planer featuring a powerful 3 HP motor and 5000 RPM cutterhead speed. The headstock sits atop a four-column support with easy handwheel height adjustment and column locks. The G0815 offers two feed-rate settings, letting you choose between 16 and 30 FPM to ensure the smooth finish you need on practically any type of wood. This great 15″ Heavy-Duty Planer can improve the functionality of your shop without sacrificing precious floor space, while still having the power you need to tackle large projects or do production work. One big advantage of this planer over other heavy-duty models is the fixed-height table design, which allows for a permanent infeed/outfeed roller table setup to boost production and overall convenience.

• Magnetic switch with thermal overload protection
• Twin gas struts for headstock lifting assist
• Headstock locks prevent movement while planing
• Anti-kickback fingers
• Precision-ground cast-iron table
• Retractable lifting handles
• Rubber outfeed roller
• Drive gears run in oil bath

G0941 10″ 3HP Cabinet Saw

This 10″ cabinet saw takes power and precision to the next level with a digital readout for blade angle incorporated into the front of the cabinet. Now you can dial in your bevels with absolute accuracy and achieve professional results every time. You’ll also get the largest cutting capacity available in its class, for tackling those big jobs, with 36″ to the right and 18″ to the left of the blade, with a max depth of 3-3/16″. Other features, such as a precision-ground cast-iron table, heavy-duty one-piece steel stand, included heavy-duty miter gauge, and much more, make this the ultimate Grizzly cabinet saw in its size.

• 3HP, 220V 1PH
• Digital readout for blade angle
• Rail-mounted switch with locking pin and large stop paddle
• Quick-release blade guard and spreader
• Hinged motor cover
• Comfortable polished chrome handles
• Heavy-duty miter gauge
• Smooth-running and quiet poly-V serpentine belt drive

G1023RL & G1023RLX 10″ 3 HP 240V Cabinets

We have put in years of refinement & design optimization to improve our phenomenal “G1023R” series table saws. The G1023RL 10″ 3 HP 240V Cabinet Table Saw has all the best features from the old models plus a newer riving knife system, serpentine-belt power transfer that runs quieter & smoother, encapsulated dust collection around the underside of the blade and an improved quick-release blade guard.

• Motor: 3 HP
• Tablesaw type: Cabinet
• Blade size: 10 in.
• Maximum cutting height @ 90deg: 3 in.
• Maximum cutting height @ 45deg: 2-1/8 in.

G0771Z 10″ 2 HP 120V Hybrid Table Saw with T-Shaped Fence

The G0771Z 10″ 2 HP Hybrid Table Saw blends the best features of the contractor-style table saw and cabinet-style table saw. Like the cabinet saw, it has an enclosed cabinet, heavy-duty cast-iron trunnions that mount to the cabinet and plenty of power to easily rip through hardwoods or cut dadoes. Like the contractor-style saw, it’s still light enough to move where you need it and it’s easy on the budget.

The fence on this machine is also a hybrid of the best features we’ve had in the last 30+ years. These all-time best features include the easiest lift-off and simple adjustability of one fence, the rock-solid front locking ability of another and the accessory T-slots of a third. The research and development put into this finished fence creates a simpler and more enjoyable user experience.

The G0771Z features an innovative quick-release blade guard and riving knife system that can be changed in seconds. A 4″ dust port is integrated into the steel cabinet-type stand for maximum dust collection. The precision-ground cast-iron table exceeds 40″ with the extension wings. To top it all off, it’s prewired to run on an ordinary household 120V, 20A circuit!

• Motor: 2 HP
• Tablesaw type: Hybrid
• Blade size: 10 in.
• Maximum cutting height @ 90deg: 3-1/8 in.
• Maximum cutting height @ 45deg: 2-1/4 in.
• Maximum ripping capacity – right: 31 in.
• Table type: Precision-Ground Cast Iron
• Overall table size: 40-1/2 in. x 27 in.
• Shipping weight: 371 lbs.