Bora

PM-1000 Universal Mobile Base

With the PM-1000 Universal Mobile Base, it’s never been easier to move equipment around a crowded shop. It lets you keep stationary equipment out of the way until needed, freeing space for large projects and cleaning. This adjustable mobile base can expand up to a 32×32 inch square, or a 17×48 inch rectangle to accommodate a wide variety of machines, including jointers, band saws, lathes, table saws, sanders, drill presses, planers, workbenches, and much more. 

  • Universal mobile base for machines and equipment
  • Adjustable in 1-inch (2.54 cm) increments to fit a wide variety of machines
  • Adjusts from 12×12 to 32×32 inch (30×30 to 81×81 cm) square
  • Adjusts up to 17×48 inch (43×122 cm) rectangle
  • Very low profile — increases machine height by less than 1 inch
  • Locking foot levers allow you to instantly go from stationary to mobile
  • 3-inch (7.6 cm) hard rubber wheels for easy gliding
  • 400-lb. (181 kg) weight capacity
  • Increase size with additional rail kit – BK1218
View Bora Mobility ➝

Festool

204869 Sys-Cart Rolling Systainer Cart

The cart with intelligent added extras: All four large wheels can be rotated by 360°. This makes the cart an agile set of wheels – ideal for construction sites and workshops. Two of the four wheels are fitted with locking brakes. Thanks to the coupling, the Systainer³ and Systainer T-LOC units can be secured in place with the central control element. Other objects and materials can also be easily transported on the flat surface and secured using the strap feedthroughs. The four robust handles make it easier to maneuver and position the cart.

  • For easy transportation of Systainer³ and T-LOC
  • 4 robust handles
  • 4 steering rollers, (2 of which can be locked)
  • Feedthroughs for straps

498660 Sys-Roll Systainer Cart

Weighing in at a mere 14.3 lbs and with a capacity of 220 lbs, the SYS-Roll provides a simple, convenient means to get your Festool Systainers to and from the worksite, no matter the terrain. Integrated storage secures small parts essential to the task at hand, reinforced risers tackle stairs with ease, and large, locking casters make sure your stack stays put.

Please note that that the Sys-Roll is not compatible with SYS-MINI, SYS-MIDI, and SYS-MAXI SYSTAINERS.

  • With large 7-7/8” casters and integrated stair climbing strips, the SYS-Roll is ready to go where your work takes you.
  • Boasting an 11 lb capacity, its drawer is just the place you’ve been looking to put small parts you need on the job.
  • Capable of carrying up to 220 lbs. of tools and accessories stored in your SystainerS and SORTAINERS.
  • Large, non-marring wheels and casters get you were you need to go without scuffing floors.
  • Adjustable strap keeps your stack in place even on rough terrain.
  • for transporting Systainer³, T-LOC and Classic
  • Extra large wheels (D 200 mm) for easy transportation up and down steps
  • Rotating lockable front rollers – manoeuvre in all directions
  • Incl. safety belt

204310 CT Dust Extractor Handle for MINI/MIDI-2/CT15

CT Dust Extractor Handle improves mobility for the Festool CT 22 and CT 33 Dust Extractors, helping you easily transport your CT to and from the jobsite, or from one shop station to another. Constructed from durable steel tubing with high impact plastic mounting brackets for a long life. Mounts to the rear of the dust extractor.

  • Improves mobility for the Festool CT 22 and CT 33 Dust Extractors
  • Constructed from durable steel tubing with high impact plastic mounting brackets for a long life
  • Mounts to the rear of the Dust Extractor.
  • For the convenient transportation of mobile dust extractors

452921 CT Dust Extractor Handle for CT 22/33

CT Dust Extractor Handle improves mobility for the Festool CT 22 and CT 33 Dust Extractors, helping you easily transport your CT to and from the jobsite, or from one shop station to another. Constructed from durable steel tubing with high impact plastic mounting brackets for a long life. Mounts to the rear of the dust extractor.

  • Improves mobility for the Festool CT 22 and CT 33 Dust Extractors
  • Constructed from durable steel tubing with high impact plastic mounting brackets for a long life
  • Mounts to the rear of the Dust Extractor.
  • For the convenient transportation of mobile dust extractors

492753 Boom Arm – Compatible with CT 22 and CT 33 Dust Extractors

Use the Festool CT Boom Arm to keep the cord and hose up and out of your way for more efficient work during sanding, sawing, routing or planing. With an assembled height of 7 ft and a range of motion of 140 degrees, you will virtually eliminate the headaches and inefficiencies associated with tangled cords and hoses. Stabilizer bars straddle the base of the CT Dust Extractor for secure and stable use. Constructed of durable steel tubing for a long service life. Includes a 5 ft electrical extension cord and a 50 mm x 5 ft Antistatic hose with female coupler, allowing a good working length off the end of the boom arm when coupled to the standard 27 mm x 3.5 m hose supplied with the CT Dust Extractor. Requires handle (452921) for mounting onto the CT 22 or CT 33 Dust Extractor. For CT 26 or CT 36, you will need to purchase the CT handle (495802) and Boom Arm Support Bracket (496780).

  • Keep your cord and hose up and out of your way for more efficient work during sanding, sawing, routing or planing
  • Includes a 5 ft electrical extension cord and a 50 mm x 5 ft Antistatic hose with female coupler
  • Height: 7 ft; Range of motion 140 degrees
  • Constructed of durable steel tubing for a long service life
  • Without handle
View Festool Mobility ➝

Jet

Universal Mobile Base

The Mobile Base adds a new dimension of flexibility to your JET machines. Equipment previously considered immovable can easily be moved by only one person – rearrange your shop for special projects in just minutes. With 2 fixed and 2 swivel casters, the adjustable width and length let you configure the base to the tool for total support and portability.

  • Adjustable width and length let you configure the base to the tool for total support and portability
  • Spring-pin snap adjustment requires no tools for easy assembly
  • Two fixed and two swivel casters provide easy maneuverability
  • Different specs in a list format
  • Different specs in a list format
  • Different specs in a list format
SKUDescription
708118Expands from 18″ x 18″ to 28″ x 28″
Strong, yet lightweight base can hold tools up to 600 lbs
708119Expands from 24″ x 24″ to 34″ x 34″
Strong, yet lightweight base can hold tools up to 1200 lbs
View Jet Mobility ➝

Powermatic

1610078 Mobile Base, PJ882/PJ-882HH Jointers

The Mobile Base adds a new dimension of flexibility to your Powermatic machines. Equipment previously considered immovable can easily be moved by only one person – rearrange your shop for special projects in just minutes. Made of heavy-duty all welded steel tubular frame and independently locking, non-marking wheels.

  • Compatible with the Powermatic PJ-882HH jointer
  • Compatible with the Powermatic PJ882 jointer
  • Heavy-duty frame is welded tubular steel for strong support
  • Steel wheels provide easy mobility, independently lock for stability

2042374 Mobile Base for 54A/54HH Jointers

The Mobile Base adds a new dimension of flexibility to your Powermatic machines. Equipment previously considered immovable can easily be moved by only one person – rearrange your shop for special projects in just minutes. Made of heavy-duty all welded steel tubular frame and independently locking, non-marking wheels

  • Heavy-duty frame is welded tubular steel for strong support
  • Steel wheels provide easy mobility, independently lock for stability
  • Compatible with Powermatic 54A/54HH Jointers

2042376 Mobile Base for 60C,60HH Jointers

The Mobile Base adds a new dimension of flexibility to your Powermatic machines. Equipment previously considered immovable can easily be moved by only one person – rearrange your shop for special projects in just minutes. Made of heavy-duty all welded steel tubular frame and independently locking, non-marking wheels.

  • Heavy-duty frame is welded tubular steel for strong support
  • Steel wheels provide easy mobility, independently lock for stability
  • Compatible with 60C,60HH Jointers
View Powermatic Mobility ➝

SawStop

Contractor Saw Integrated Mobile Base

Easily move your saw around your shop. Fully welded 1/4″ rigid steel construction, hard wearing black powder coat finish.

  • Durable polyurethane wheels:Two fixed-direction wheels, Two 360° casters for easy positioning
  • Easy one-foot operation
  • Supports entire table and requires no extension piece – even for the 52″ extension table

Professional Saw Integrated Mobile Base

Easily move your saw around your shop. Fully welded 1/4″ rigid steel construction, hard wearing black powder coat finish.

  • Ergonomic one-foot operation mechanicaly lifts the saw in a single motion
  • When not engaged, the cabinet rests directly on the floor

Professional Saw Industrial Mobile Base w/ PCS Conversion Kit

Supports saw and extention table, no additional extention hardware needed, 1000 lb capacity, no flimsy wheel brakes, non marring polyurethane wheels,when disengaged the saw rests firmy on the ground distributing weight directly to the floor, not the wheels. Assembly includes kit to adapt Industrial Mobile Base for use with Professional Cabinet Saw.

  • Three quick pumps of the foot petal raises the saw
  • Four 360° casters allow the saw to easily move in any direction.
  • Hydraulic piston assist lift.
  • High performance full ball bearing casters.

Industrial Saw Industrial Mobile Base

Supports saw and extention table, no additional extention hardware needed, 1000 lb capacity, no flimsy wheel brakes, non marring polyurethane wheels,when disengaged the saw rests firmy on the ground distributing weight directly to the floor, not the wheels.

  • Three quick pumps of the foot petal raises the saw
  • Four 360° casters allow the saw to easily move in any direction
  • Hydraulic piston assist lift
  • High performance full ball bearing casters
View SawStop Mobility ➝

Shop Fox

D3757 Universal Mobile Base Kit

This universal mobile base can be customized to fit any size machine base with your own cut-to-size plywood. Sturdy corner brackets attach with through-bolts for tremendous strength. Kick-stand casters provide easy mobility, and the adjustable feet provide stability during stationary machine use.

  • Accepts 3/4″ thick plywood (not included)
  • Includes two fixed caster brackets and two swivel caster brackets
  • 600 lb. max. capacity

D4666 Industrial Mobile Base

There’s no need to bend down to set or release the mobile mechanism on these mobile bases. Simply step on the foot lever to activate the height-adjustable leveling feet on two of the corners, and your equipment is locked in place. Then, when the work is done and it’s time to move the equipment, flip up the levers with your toe, and you’re easily mobile on the smooth rolling extreme-duty casters. We also placed the adjustment bolts along the edge of the adjustment bars for secure double-axis and double-contact rigidity. Adjusts from 19″ x 21″ to 29-1/2″ x 29-1/2″.

  • Heavy-duty rubber and steel casters with sealed bearings
  • Reinforced/welded caster posts
  • Adjustable positive stop/rubber leveling feet
  • 2 fixed casters and 2 swivel casters
  • Easy-float, spring-loaded toe-flip lifting levers
  • Single-point bi-axis engagement bolts
  • 1200 lb. capacity
  • Adjusts from 19″ x 21″ to 29-1/2″ x 29-1/2″
  • Clearance from floor: 2-3/16″

D2057A Adjustable Mobile Base – Heavy-Duty

A paragraph here if neeWith a 700-pound capacity, the D2057A Heavy-Duty Mobile Base from Shop Fox is designed to give you a stable and mobile platform upon which to mount machinery and equipment having a variety of base sizes and weights. The base can be assembled in any of eight configurations providing maximum flexibility of use. The unique two-piece retractable feet use rare earth magnets to allow the knob to turn while the foot pad is tight to the floor. The heavy-duty casters are arranged on outrigger–allowing the machine to sit as low as possible and yet be extremely stable. Swivel casters on two corners provide excellent maneuverability. The bolt pattern on the fixed caster side allows orientation of the wheels in either of two directions. If your mobile base came with red casters, their replacements will be the D2604 3″ Red Polyurethane Fixed Caster or the D2607 3″ Red Polyurethane Swivel Caster. If your mobile base came with black casters, their replacements will be the D4173 Hard Rubber Swivel Caster or the D4174 Hard Rubber Fixed Caster.

  • 20″ x 20″ to 29-1/2″ x 29-1/2″
  • Corner pads measure 4″ square
  • 700 lb. max. capacity

D2058A Adjustable Mobile Base – Extra Heavy-Duty

Shop Fox® Heavy Duty Mobile Bases are designed to give you a stable and mobile platform upon which to mount machinery and equipment having a variety of base sizes and weights. The heavy-duty metal casters are arranged on outriggers allowing the machine to sit as low as possible and yet be extremely stable. Swivel casters on two corners provide excellent maneuverability. The bolt pattern on the fixed caster side allows orientation of the wheels in either of two directions. The base can be assembled in any of eight configurations providing maximum flexibility of use. The unique two piece retractable feet use rare earth magnets to allow the knob to turn while the foot pad is tight to the floor. You will find these mobile bases to be far superior to any mobile base on the market in strength, adjustability and movability. This patented mobile base is the most stable on the market with outrigger type supports. Adjusts from 18-1/2″ x 24-1/2″” to 28-1/2″ x 33-1/2″. 1300 lb. maximum capacity.

  • 18-1/2″ x 24-1/2″ to 28-1/2″ x 33-1/2″
  • Corner pads measure 4″ square
  • 1300 lb. Capacity
View Shop Fox Mobility ➝